STACK Quick Start Assemblies - Division 4, Masonry

Overview
STACK currently offers two assemblies under Division 04. The brick assembly contains a large selection of brick types, and the block wall contains several choices for CMU block size.

Table of contents
04 Masonry

• Brick – Area & Surface Area
• CMU Wall - Linear

04 Masonry

Brick – Area & Surface Area

Summary: This assembly is designed for either an Area or a Surface Area takeoff.

Variables:

There are no variables in this assembly.

Required Items:

These items will be automatically added to your takeoff.

• Weep Holes – yields number of pieces based on total area.
• Mortar – calculates the number of 80 lb. Bags.
• Brick Labor – by the square foot.

Item Groups:

This group contains a selection of items to choose if needed.

• · Choose Brick – a wide assortment of brick types by the thousand.

CMU Wall - Linear

Summary: This assembly is designed for a linear takeoff.

Variables:

• Wall Height In Feet - all items in this assembly use this variable.
• Control Joint Spacing In Feet – only required if choosing the control joint item.
• Vertical Rebar Spacing In Inches - used to calculate both rebar and grout.
• Rebar Count Per Cell – used to calculate rebar.

Required Items:

• CMU Labor – by the block.
• Rebar – yields linear feet and calculated using takeoff length, rebar spacing, wall height and rebar count variables.
• Masonry Grout – in cubic feet.

Item Groups:

These groups contain a selection of items to choose if needed.

• Choose Block – an assortment of CMU block sizes all 8”x16”.
• Control Joint – in linear feet, relies on the control join spacing variable.
• Mesh Reinforcing – horizontal reinforcing in total linear feet.

More on Quick Start Assemblies

02 Asphalt Quick Start Assemblies
06 Wood, Plastics & Composites
07 Roofing Quick Start Assemblies
09 Finishes Quick Start Assemblies
32 Landscaping Quick Start Assemblies